#------------------------------------------------------------------------------ # config.txt - fli4l configuration parameters V1.6.2 # # You can edit/change this file with fliwiz V1.6 or any text editor. # # P L E A S E R E A D T H E D O C U M E N T A T I O N , # S E E R E A D M E . T X T # # B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N # L E S E N , S I E H E R E A D M E . T X T # # Creation: 13.04.2000 fm # Last Update: 24.07.2001 jm # # Copyright (c) 2000-2001 Frank Meyer # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # General settings: #------------------------------------------------------------------------------ HOSTNAME='HP-Router' # name of fli4l router PASSWORD='XXXXX' # password for telnetd, ftpd, sshd, and samba MOUNT_BOOT='rw' # mount boot device (floppy): ro, rw, no #------------------------------------------------------------------------------ # Ethernet card drivers: # uncomment your ethernet card #------------------------------------------------------------------------------ ETH_DRV_N='2' # number of ethernet drivers to load, usually 1 #ETH_DRV_1='3c505' # ISA: 3COM Etherlink Plus (3c505) #ETH_DRV_1='3c507' # ISA: 3COM Etherlink 16 (3c507) #ETH_DRV_1='3c509' # ISA: 3COM EtherLinkIII (3c509) #ETH_DRV_1='3c515' # ISA: 3COM EtherLink XL ISA (3c515) #ETH_DRV_1='3c59x' # PCI: 3COM Vortex/Boomerang 3c59x,3c900,3c905 #ETH_DRV_1='82596' # Apricot Xen-II on board Ethernet #ETH_DRV_1='8390 3c503' # ISA: 3COM EtherLinkII (3c503) #ETH_DRV_1='8390 cs89x0' # ISA: CRYSTAL LAN CS8900/CS8920 #ETH_DRV_1='8390 e2100' # ISA: Cabletron E21xx ISA #ETH_DRV_1='8390 hp' # ISA: HP PCLAN (27245, 27xxx) ISA #ETH_DRV_1='8390 hp-plus' # ISA: HP PCLAN+ (27247B and 27252A) ISA #ETH_DRV_1='8390 ne' # ISA: NE2000 ISA clone #ETH_DRV_1='8390 ne2k-pci' # PCI: NE2000 PCI clone (Realtek 8019/8029) #ETH_DRV_1='8390 smc-ultra' # ISA: SMC ULTRA #ETH_DRV_1='8390 wd' # ISA: SMC WD80*3 #ETH_DRV_1='at1700' # ISA: AT1700 (Fujitsu 86965) ISA #ETH_DRV_1='de4x5' # PCI/EISA: Digital DE425, DE434, DE435, DE450, DE500 #ETH_DRV_1='depca' # ISA: DEPCA, DE10x, DE200, DE201, DE202, DE422 #ETH_DRV_1='dgrs' # PCI: Digi International RightSwitch PCI/EISA #ETH_DRV_1='dmfe' # PCI: DM9102 compatible PCI cards from Davicom #ETH_DRV_1='eepro' # ISA: Intel EtherExpress Pro/10 #ETH_DRV_1='pci-scan eepro100' # PCI: Intel EtherExpressPro PCI 10+/100B/100+ (NEW) #ETH_DRV_1='eexpress' # ISA: EtherExpress16 ISA #ETH_DRV_1='epic100' # PCI: SMC EPIC/100 (EtherPower II) PCI #ETH_DRV_1='eth16i' # ISA/EISA: ICL EtherTeam 16i/32 #ETH_DRV_1='ewrk3' # ISA: EtherWORKS 3 ISA (DE203, DE204, DE205) #ETH_DRV_1='hp100' # ISA/EISA/PCI: HP 10/100VG PCLAN (ISA, EISA, PCI) #ETH_DRV_1='lance' # ISA: AMD LANCE and PCnet (AT1500, NE2100) ISA #ETH_DRV_1='old_tulip' # PCI: Old DECchip Tulip (dc21x4x) PCI ETH_DRV_2='pcnet32' # PCI: AMD PCI PCnet32 ETH_DRV_1='rtl8139' # PCI: RealTek 8129/8139 (not 8019/8029!) PCI #ETH_DRV_1='sis900' # PCI: SiS 900/7016 #ETH_DRV_1='tlan' # PCI: TI ThunderLAN (Compaq Netelligent ...) #ETH_DRV_1='tulip' # PCI: DECchip Tulip (dc21x4x) PCI #ETH_DRV_1='pci-scan natsemi' # PCI: Nat Semi (NEW) #ETH_DRV_1='pci-scan starfire' # PCI: Starfire (NEW) #ETH_DRV_1='pci-scan via-rhine' # PCI: VIA Rhine PCI (3043 or Rhine-2 VT86c100A) (NEW) #ETH_DRV_1='pci-scan winbond-840' # PCI: Winbond 840 (NEW) #ETH_DRV_1='lanstreamer' # Token Ring: IBM Auto LANStreamer PCI Adapter #ETH_DRV_1='olympic' # Token Ring: IBM cards (Pit/Pit-Phy/Olympic) #ETH_DRV_1='ibmtr' # Token Ring: IBM 16/4 #ETH_DRV_1='8390 pcnet_cs' # PCMCIA: NS8390-based cards (NE2000, DLINK etc) #ETH_DRV_1='3c574_cs' # PCMCIA: 3Com 574 #ETH_DRV_1='3c575_cs' # PCMCIA: 3Com 575 (NEW) #ETH_DRV_1='3c589_cs' # PCMCIA: 3Com 589 #ETH_DRV_1='airo' # PCMCIA: Airo 4500 & 4800 series cards (NEW) #ETH_DRV_1='airo_cs' # PCMCIA: Airo 4500 & 4800 series cards (NEW) #ETH_DRV_1='eepro100_cb' # PCMCIA: EtherExpress Pro 100 (NEW) #ETH_DRV_1='epic_cb' # PCMCIA: SMC 83c170 EPIC/100 (NEW) #ETH_DRV_1='ibmtr_cs' # PCMCIA: IBM Token Ring (NEW) #ETH_DRV_1='netwave_cs' # PCMCIA: Netwave AirSurfer Wireless LAN #ETH_DRV_1='nmclan_cs' # PCMCIA: New Media Ethernet LAN #ETH_DRV_1='pcnet_cs' # PCMCIA: NS8390 Based cards (NEW) #ETH_DRV_1='ray_cs' # PCMCIA: Raylink wireless cards (NEW) #ETH_DRV_1='smc91c92_cs' # PCMCIA: SMC91c92-based cards #ETH_DRV_1='tulip_cb' # PCMCIA: DEC 21040-family cards (NEW) #ETH_DRV_1='wavelan_cs' # PCMCIA: WaveLAN #ETH_DRV_1='wavelan2_cs' # PCMCIA: WaveLAN2 #ETH_DRV_1='wvlan_cs' # PCMCIA: Lucent WaveLAN/IEEE 802.11 (NEW) #ETH_DRV_1='xirc2ps_cs' # PCMCIA: Xircom: CE2, CEM28, CEM33, or CE3 ETH_DRV_1_OPTION='' # additional option, e.g. 'io=0x340' for ne ETH_DRV_2_OPTION='' # additional option, e.g. 'io=0x340' for ne #------------------------------------------------------------------------------ # Ether networks used with IP protocol: #------------------------------------------------------------------------------ IP_ETH_N='1' # number of ip ethernet networks, usually 1 IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='192.168.0.88' # IP address of your n'th ethernet card IP_ETH_1_NETWORK='192.168.0.0' # network of your LAN IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #------------------------------------------------------------------------------ # Additional routes, optional #------------------------------------------------------------------------------ IP_DEFAULT_GATEWAY='' # normally not used, read documentation! IP_ROUTE_N='0' # number of additional routes IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway #------------------------------------------------------------------------------ # Masquerading: #------------------------------------------------------------------------------ MASQ_NETWORK='192.168.0.0/24' # networks to masquerade (e.g. our LAN) MASQ_MODULE_N='13' # load n masq modules (default: only ftp) MASQ_MODULE_1='ftp' # ftp MASQ_MODULE_2='h323' # h323 (netmeeting) MASQ_MODULE_3='icq' # icq (use with caution!) MASQ_MODULE_4='irc' # irc MASQ_MODULE_5='raudio' # raudio MASQ_MODULE_6='vdolive' # vdolive MASQ_MODULE_7='quake' # quake MASQ_MODULE_8='cuseeme' # cuseeme MASQ_MODULE_9='pptp' # pptp MASQ_MODULE_10='ipsec' # ipsec MASQ_MODULE_11='dplay' # dplay (direct play) MASQ_MODULE_12='msn-0.02' # msn zone (use version 0.01 or 0.02) MASQ_MODULE_13='udp_dloose' # pseudo mod: some internet games need it #------------------------------------------------------------------------------ # Routing without masquerading #------------------------------------------------------------------------------ ROUTE_NETWORK='192.168.1.0/24' # optional: route from/to network, no masq #------------------------------------------------------------------------------ # Routing: internal hosts to deny forwarding #------------------------------------------------------------------------------ FORWARD_DENY_HOST_N='0' # number of denied hosts FORWARD_DENY_HOST_1='192.168.6.5' # optional: 1st denied host FORWARD_DENY_HOST_2='192.168.6.6' # optional: 2nd denied host #------------------------------------------------------------------------------ # Routing: ports to reject/deny forwarding (from inside and outside!) #------------------------------------------------------------------------------ FORWARD_DENY_PORT_N='1' # no. of ports to reject/deny forwarding FORWARD_DENY_PORT_1='137:139 REJECT' # deny/reject forwarding of netbios #------------------------------------------------------------------------------ # Firewall: ports to reject/deny from outside (all served ports) # # here we leave two ports untouched: # # 53 dns # 113 auth #------------------------------------------------------------------------------ FIREWALL_DENY_PORT_N='7' # no. of ports to reject/deny FIREWALL_DENY_PORT_1='0:52 REJECT' # privileged ports: reject or deny FIREWALL_DENY_PORT_2='54:79 REJECT' # privileged ports: reject or deny FIREWALL_DENY_PORT_3='81:112 REJECT' # privileged ports: reject or deny FIREWALL_DENY_PORT_4='114:1023 REJECT' # privileged ports: reject or deny FIREWALL_DENY_PORT_5='5000:5001 REJECT' # imond/telmond ports: reject or deny FIREWALL_DENY_PORT_6='8000 REJECT' # proxy access: reject or deny FIREWALL_DENY_PORT_7='20012 REJECT' # vbox server access: reject or deny FIREWALL_DENY_ICMP='no' # deny icmp (ping): yes or no FIREWALL_LOG='yes' # log access to rejected/denied ports #------------------------------------------------------------------------------ # Domain configuration: #------------------------------------------------------------------------------ START_DNS='yes' # start dns server: yes or no DNS_FORWARDERS='151.189.0.65' # DNS servers of your provider, e.g. NexGo DNS_VERBOSE='no' # log queries in /usr/local/ens/ens.log DOMAIN_NAME='xxxx.de' # your domain name HOSTS_N='7' # number of hosts in your domain HOST_1='192.168.0.88 HP-Router' # Router HOST_2='192.168.0.1 Mond' # Wohnzimmer HOST_3='192.168.0.2 Sonne' # JoJo HOST_4='192.168.0.3 Erde ' # Marion HOST_5='192.168.0.99 linux' # Linux Rechner HOST_6='192.168.0.4 Erde ' # Ersatz HOST_7='192.168.0.5 Erde ' # Ersatz #------------------------------------------------------------------------------ # Special DNS configuration #------------------------------------------------------------------------------ DNS_N='0' # number of special dns servers, normally 0 #DNS_1='firma.de 192.168.1.12' # 1st special dns server for firma.de #DNS_2='lan.firma.de 192.168.2.12' # 2nd special dns server for lan.firma.de #------------------------------------------------------------------------------ # imond configuration: #------------------------------------------------------------------------------ START_IMOND='yes' # start imond: yes or no IMOND_PORT='5000' # TCP-Port, see also FIREWALL_DENY_PORT_x! IMOND_PASS='' # imond-password, may be empty IMOND_ADMIN_PASS='xxxxx' # imond-admin-password, may be empty IMOND_LED='com3' # tty for led: com1 - com4 or empty IMOND_BEEP='yes' # beep if connection going up/down IMOND_LOG='yes' # log /var/log/imond.log: yes or no IMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log IMOND_ENABLE='yes' # accept "enable/disable" commands IMOND_DIAL='yes' # accept "dial/hangup" commands IMOND_ROUTE='yes' # accept "route" command IMOND_REBOOT='yes' # accept "reboot" command #------------------------------------------------------------------------------ # Generic circuit configuration: #------------------------------------------------------------------------------ IP_DYN_ADDR='yes' # use dyn. ip addresses (most providers do) DIALMODE='auto' # standard dialmode: auto, manual, or off #------------------------------------------------------------------------------ # Optional package: ISDN #------------------------------------------------------------------------------ OPT_ISDN='yes' # use ISDN: yes or no ISDN_TYPE='9' # type, e.g. Teles 16.3 ISA ISDN_IO='0x398' # io, e.g. 0xd80 for Teles 16.3 ISA ISDN_IO0='' # io0 ISDN_IO1='' # io1 ISDN_MEM='' # mem ISDN_IRQ='10' # irq, e.g. 12 for Teles 16.3 ISA ISDN_DEBUG_LEVEL='31' # debug level (hisax driver) ISDN_VERBOSE_LEVEL='2' # verbose level #---------------------------------------------------------------------------- # ISDN Circuits: #---------------------------------------------------------------------------- ISDN_CIRCUITS_N='1' # number of ISDN circuits, DSL: see below! #---------------------------------------------------------------------------- # Circuit 1: Internet-By-Call-Provider Planet-Interkom #---------------------------------------------------------------------------- ISDN_CIRC_1_NAME='ArcorFlat' # circuit nexgo ISDN_CIRC_1_TYPE='ppp' # circuit uses sync ppp (ipppd) ISDN_CIRC_1_BUNDLING='yes' # channel bundling: yes or no ISDN_CIRC_1_BANDWIDTH='6144 30' # if bundling=yes: opt. bandwidth on demand ISDN_CIRC_1_LOCAL='' # local ip address of your ISDN card - dummy ISDN_CIRC_1_REMOTE='' # remote ip address (ISDN) - dummy ISDN_CIRC_1_NETMASK='255.255.255.0' # netmask (ISDN) - dummy ISDN_CIRC_1_MTU='1024' # maximum transmission unit ISDN_CIRC_1_MRU='1524' # maximum receive unit ISDN_CIRC_1_COMPRESSION='yes' # compress headers if ppp: 'yes' or 'no' ISDN_CIRC_1_IPX_NETWORK='' # optional: ipx network ISDN_CIRC_1_IPX_NODE='' # optional: ipx nodes local:remote ISDN_CIRC_1_REMOTENAME='' # optional: remote hostname for dialin ISDN_CIRC_1_USER='xxxxxxxxxxx' # User-ID to login into provider's gateway ISDN_CIRC_1_PASS='xxxxx' # Password for login ISDN_CIRC_1_ROUTE='0.0.0.0' # this is the default route ISDN_CIRC_1_DIALOUT='xxxxxxx' # dialout: ISDN number of provider ISDN_CIRC_1_DIALIN='' # dialin: no dialin ISDN_CIRC_1_CALLBACK='off' # callback mode: 'in', 'out', or 'off' ISDN_CIRC_1_CBDELAY='3' # callback delay, only used for callbacks ISDN_CIRC_1_EAZ='36xxxxxx' # Your MSN (without area code) ISDN_CIRC_1_DEBUG='yes' # enable ipppd debugging, 'yes' or 'no' ISDN_CIRC_1_AUTH='' # require the peer to authenticate itself ISDN_CIRC_1_HUP_TIMEOUT='600' # Hangup after 45 seconds idle time ISDN_CIRC_1_CHARGEINT='60' # Value of charge interval (in seconds) ISDN_CIRC_1_TIMES='Mo-Fr:09-18:0.0:N Mo-Fr:18-09:0.0:N Sa-Su:00-24:0.0:N' # times/charges when LCR #---------------------------------------------------------------------------- # Circuit 2: Internet-By-Call-Provider MSN #---------------------------------------------------------------------------- ISDN_CIRC_2_NAME='msn' # circuit MSN ISDN_CIRC_2_TYPE='ppp' # circuit uses sync ppp (ipppd) ISDN_CIRC_2_BUNDLING='no' # channel bundling: yes or no ISDN_CIRC_2_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand ISDN_CIRC_2_LOCAL='' # local ip address of your ISDN card - dummy ISDN_CIRC_2_REMOTE='' # remote ip address (ISDN) - dummy ISDN_CIRC_2_NETMASK='255.255.255.0' # netmask (ISDN) - dummy ISDN_CIRC_2_MTU='1024' # maximum transmission unit ISDN_CIRC_2_MRU='1524' # maximum receive unit ISDN_CIRC_2_COMPRESSION='no' # compress headers if ppp: 'yes' or 'no' ISDN_CIRC_2_IPX_NETWORK='' # optional: ipx network ISDN_CIRC_2_IPX_NODE='' # optional: ipx nodes local:remote ISDN_CIRC_2_REMOTENAME='' # optional: remote hostname for dialin ISDN_CIRC_2_USER='msn' # User-ID to login into provider's gateway ISDN_CIRC_2_PASS='msn' # Password for login ISDN_CIRC_2_ROUTE='0.0.0.0' # this is the default route ISDN_CIRC_2_DIALOUT='0192658' # dialout: ISDN number of provider ISDN_CIRC_2_DIALIN='' # dialin: no dialin ISDN_CIRC_2_CALLBACK='off' # callback mode: 'in', 'out', or 'off' ISDN_CIRC_2_CBDELAY='3' # callback delay, only used for callbacks ISDN_CIRC_2_EAZ='81330' # Your MSN (without area code) ISDN_CIRC_2_DEBUG='yes' # enable ipppd debugging, 'yes' or 'no' ISDN_CIRC_2_AUTH='' # require the peer to authenticate itself ISDN_CIRC_2_HUP_TIMEOUT='45' # Hangup after 45 seconds idle time ISDN_CIRC_2_CHARGEINT='1' # Value of charge interval (in seconds) ISDN_CIRC_2_TIMES='Mo-Su:00-24:0.029:N' # times/charges when LCR #------------------------------------------------------------------------------ # Circuit 3: bidirectional connection to another router with raw tcpip # not activated yet, only example for non-default-circuit #------------------------------------------------------------------------------ ISDN_CIRC_3_NAME='Firma' # circuit name, e.g. 'Firma' ISDN_CIRC_3_TYPE='raw' # circuit uses raw tcp/ip ISDN_CIRC_3_BUNDLING='no' # channel bundling: yes or no ISDN_CIRC_3_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand ISDN_CIRC_3_LOCAL='192.168.120.8' # local ip address of this circuit ISDN_CIRC_3_REMOTE='192.168.120.7' # remote ip address of this circuit ISDN_CIRC_3_NETMASK='255.255.255.0' # netmask of this circuit ISDN_CIRC_3_MTU='1024' # maximum transmission unit ISDN_CIRC_3_MRU='1524' # maximum receive unit ISDN_CIRC_3_COMPRESSION='no' # compress headers if ppp: 'yes' or 'no' ISDN_CIRC_3_IPX_NETWORK='' # optional: ipx network ISDN_CIRC_3_IPX_NODE='' # optional: ipx nodes local:remote ISDN_CIRC_3_REMOTENAME='' # optional: remote hostname for dialin ISDN_CIRC_3_USER='' # user-id not used if raw connection ISDN_CIRC_3_PASS='' # password not used if raw connection ISDN_CIRC_3_ROUTE='192.168.1.0' # remote net to reach over this circuit ISDN_CIRC_3_DIALOUT='0221xxxxxx' # dialout no. of remote router ISDN_CIRC_3_DIALIN='221xxxxxx' # dialin no. with area code, but no leading '0' ISDN_CIRC_3_CALLBACK='off' # callback mode: 'in', 'out', or 'off' ISDN_CIRC_3_CBDELAY='3' # callback delay, only used for callbacks ISDN_CIRC_3_EAZ='81330' # Your MSN (without area code) ISDN_CIRC_3_DEBUG='no' # ever no if raw-ip connection ISDN_CIRC_3_AUTH='' # not needed if raw-ip connection ISDN_CIRC_3_HUP_TIMEOUT='45' # Hangup after XX seconds idle time ISDN_CIRC_3_CHARGEINT='90' # Value of charge interval (in seconds) ISDN_CIRC_3_TIMES='Mo-Fr:09-18:0.08:N Mo-Fr:18-09:0.03:N Sa-Su:00-24:0.03:N' # times/charges when LCR #------------------------------------------------------------------------------ # Optional package: PPPoE #------------------------------------------------------------------------------ OPT_PPPOE='yes' # use ppp over ethernet: yes or no PPPOE_NAME='ArcorDSL' # circuit name, don't write spaces PPPOE_ETH='eth1' # eth card connected to ADSL modem, e.g. 2nd PPPOE_USER='xxxxxxx' # username PPPOE_PASS='xxxxxxx' # password PPPOE_DEBUG='no' # enable pppd debugging, 'yes' or 'no' PPPOE_HUP_TIMEOUT='600' # idle time after which to hangup PPPOE_SYNCHRONOUS='no' # synchronous ppp: yes or no PPPOE_CHARGEINT='60' # value of charge interval (in seconds) PPPOE_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR #------------------------------------------------------------------------------ # Optional package: PPTP - DSL in Austria #------------------------------------------------------------------------------ OPT_PPTP='no' # use PPP over ethernet: yes or no PPTP_ETH='eth1' # ethernet card connected to ADSL modem PPTP_USER='anonymer' # username PPTP_PASS='surfer' # password PPTP_HUP_TIMEOUT='600' # idle time after which to hangup PPTP_MODEM_TYPE='bcaa' # 2 different types in Austria: bbaa / bcaa #------------------------------------------------------------------------------ # Optional package: HTTP-Server for Monitoring #------------------------------------------------------------------------------ OPT_HTTPD='yes' # install mini web server: yes or no HTTPD_PORT='81' # http port, see also FIREWALL_DENY_PORT_x ! HTTPD_USER_N='1' # Numbers of users for the HTTPD-server HTTPD_USER_1='xxxxxxxxxx' # Name of the 1st user HTTPD_PASS_1='xxxxxxxxxxxxx' # Password of the 1st user HTTPD_RIGHTS_1='all' # Rights of the 1st user #---------------------------------------------------------------------------- # optional package: PPPoE-Status #---------------------------------------------------------------------------- OPT_POESTATUS='yes' # show pppoe status on console #3 #------------------------------------------------------------------------------ # optional package: syslogd #------------------------------------------------------------------------------ OPT_SYSLOGD='yes' # start syslogd: yes or no SYSLOGD_DEST='@192.168.0.2' # destination of syslog messages #------------------------------------------------------------------------------ # optional package: klogd #------------------------------------------------------------------------------ OPT_KLOGD='yes' # start klogd: yes or no #------------------------------------------------------------------------------ # telmond configuration: #------------------------------------------------------------------------------ OPT_TELMOND='yes' # start telmond: yes or no TELMOND_PORT='5001' # TCP-Port, see also FIREWALL_DENY_PORT_x! TELMOND_LOG='yes' # log /var/log/telmond.log: yes or no TELMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log TELMOND_MSN_N='0' # number of msn->ip mapping entries TELMOND_MSN_1='123 192.168.6.2' # e.g. map MSN 123 to client 192.168.6.2 TELMOND_CMD_N='0' # no. of commands to be executed if call-in TELMOND_CMD_1='123 * sleep 5; imonc dial' # e.g. dial out via default circuit #------------------------------------------------------------------------------ # Optional package: tools #------------------------------------------------------------------------------ OPT_TOOLS='yes' # install additional tools: yes or no #------------------------------------------------------------------------------ # Optional package: wget #------------------------------------------------------------------------------ OPT_WGET='no' # install wget, see howto on www.fli4l.de #------------------------------------------------------------------------------ # Optional package: PNP #------------------------------------------------------------------------------ OPT_PNP='no' # install isapnp tools: yes or no #------------------------------------------------------------------------------ # Optional package: SERIAL #------------------------------------------------------------------------------ OPT_SERIAL='no' # install stty and setserial: yes or no #------------------------------------------------------------------------------ # Optional package: RESCUE #------------------------------------------------------------------------------ OPT_RESCUE='yes' # install e2fsck #------------------------------------------------------------------------------ # Optional package: TELNETD #------------------------------------------------------------------------------ OPT_TELNETD='yes' # install telnetd: yes or no #------------------------------------------------------------------------------ # Optional package: SSHD (secure shell) #------------------------------------------------------------------------------ OPT_SSHD='no' # install sshd: yes or no #------------------------------------------------------------------------------ # Optional package: FTPD #------------------------------------------------------------------------------ OPT_FTPD='yes' # install ftpd: yes or no FTPD_PORT='21' # ftp port, see also FIREWALL_DENY_PORT_x ! #------------------------------------------------------------------------------ # Optional package: LCD #------------------------------------------------------------------------------ OPT_LCD='yes' # install lcd driver and tools: yes or no LCD_COLS='20' # no. of lcd columns (16,20,32,40) dflt: 20 LCD_LINES='4' # no. of lcd lines (1,2,4) dflt: 4 LCD_ADDRESS='0x0278' # IO address of used lpt port, or 'comX' LCD_TIME_LONG='' # long delay time (empty = default: 100) LCD_TIME_SHORT='' # short delay time (empty = default: 40) LCD_OPTION='' # set 'a_type=1', if you have a HD66712 chip LCD_START_ISDN_RATE='yes' # isdn/dsl rating display on lcd: yes or no LCD_TYPE_N='8' # no. of data types to show, see docum. LCD_TYPE_1='39 0 2 IN:' # Text LCD_TYPE_2='18 3 2' # DSL input rate LCD_TYPE_3='39 11 2 OUT:' # Text LCD_TYPE_4='19 15 2' # DSL output rate LCD_TYPE_5='39 0 3 >' # Text LCD_TYPE_6='34 1 3' # DSL quantity in channel 1 LCD_TYPE_7='39 11 3 <' # Text LCD_TYPE_8='37 12 3' # DSL quantity out channel 1 LCD_TYPE_ONLINE_N='5' # no. of data types to show if online LCD_TYPE_ONLINE_1=' 8 0 0' # DSL status channel 1 LCD_TYPE_ONLINE_2='39 7 0 :' # Text LCD_TYPE_ONLINE_3='31 9 0' # DSL online time channel 1 LCD_TYPE_ONLINE_4='39 0 1 IP:' # Text LCD_TYPE_ONLINE_5='25 4 1' # DSL ip address LCD_TYPE_OFFLINE_N='5' # no. of data types to show if offline LCD_TYPE_OFFLINE_1=' 0 0 0' # local date LCD_TYPE_OFFLINE_2=' 2 12 0' # local time LCD_TYPE_OFFLINE_3=' 39 0 1 CPU:' # Text LCD_TYPE_OFFLINE_4=' 38 4 1' # CPU LCD_TYPE_OFFLINE_5=' 39 9 1'% # Text LCD_VAR_TEXT_1='Text1' # Default-Text 1 -> /etc/lcd_text1.txt LCD_VAR_TEXT_2='Text2' # Default-Text 2 -> /etc/lcd_text2.txt LCD_VAR_TEXT_3='Text3' # Default-Text 3 -> /etc/lcd_text3.txt LCD_VAR_TEXT_4='Text4' # Default-Text 4 -> /etc/lcd_text4.txt #------------------------------------------------------------------------------ # Optional package: PPP #------------------------------------------------------------------------------ OPT_PPP='no' # install serial ppp package PPP_DEV='com1' # COM port - empty, com1 or com2 PPP_SPEED='38400' # COM port speed PPP_IPADDR='192.168.4.1' # IP address of fli4l router (COMx) PPP_PEER='192.168.4.2' # IP address of peer (pointopoint) PPP_NETWORK='192.168.4.0' # network #------------------------------------------------------------------------------ # Optional package: IPX network protocol #------------------------------------------------------------------------------ OPT_IPX='no' # use ipx: yes or no IPX_INTERNAL_NET='0x0ABCDEF0' # internal network IPX_NODE='1' # node IPX_INTERFACE='eth0' # ethernet interface used for IPX IPX_FRAME='802.2' # frame type: 802.2,802.3,ether_ii,AUTO IPX_NETWORK='0x0ABCDEF1' # network #------------------------------------------------------------------------------ # Optional package: IMODEM #------------------------------------------------------------------------------ OPT_IMODEM='no' # install isdn modem emulator: yes or no IMODEM_MSN='81330' # isdn modem emulator: your msn IMODEM_SERIAL='com1' # isdn modem emulator: COM port IMODEM_SPEED='115200' # isdn modem emulator: COM speed #------------------------------------------------------------------------------ # Optional package: LPD # !!! Attention !!! Printer-Queue-Names changed, please read the manual ! # !!! Attention !!! LPD_PORT_x changed, please read the manual ! #------------------------------------------------------------------------------ OPT_LPD='no' # install lpd: yes or no LPD_PORT_N='1' # how many ports for printing are used LPD_PORT_1='0x378' # io-adress for printer on 1st port: 0x3bc,0x378 or 0x278 LPD_RAM='4096' # use 4 MB RAM (4096 KB) for printer queues #------------------------------------------------------------------------------ # Optional package: SAMBA # (if you want to print over samba, also OPT_LPD must be set to 'yes') #------------------------------------------------------------------------------ OPT_SAMBA='yes' # install samba: yes or no SAMBA_WORKGROUP='berlin' # workgroup name of windows-clients SAMBA_ADMINIP='192.168.0.' # ip addr of smb-client (mount fli4l rootfs) SAMBA_LPNET_1='' # allowed networks for LPD_PORT_1, if empty all internal nets SAMBA_TIMESERVER='yes' # smb-timeserver for win-clients: yes or no #------------------------------------------------------------------------------ # Optional package: NMBD #------------------------------------------------------------------------------ OPT_NMBD='yes' # install nmbd as SMB Nameserver NMBD_MASTERBROWSER='no' # act as a masterbrowser: yes or no NMBD_WINSSERVER='no' # act as an WINS-Server: yes or no NMBD_WINSCLIENT='no' # act as an WINS-Client: yes or no NMBD_EXTWINSIP='' # IP address of the external WINS-Server NMBD_WINSPROXY='no' # act as an WINS-Proxy : yes or no #------------------------------------------------------------------------------ # Optional package: PORTFW # # If you set OPT_PORTFW='yes', you have to edit opt/usr/local/bin/portfw.sh #------------------------------------------------------------------------------ OPT_PORTFW='yes' # install port forwarding tools/modules #------------------------------------------------------------------------------ # optional package: y2k correction #------------------------------------------------------------------------------ OPT_Y2K='no' # y2k correction: yes or no Y2K_DAYS='' # correct hardware Y2K-Bug: add x days #------------------------------------------------------------------------------ # Optional package: TIME #------------------------------------------------------------------------------ OPT_TIME='yes' # install time zone informations: yes or no TIME_ZONE='MET' # timezone: MET or GMT TIME_SERVICE='yes' # enable "time" service (port 37): yes or no TIME_SERVER='ntps1-1.uni-erlangen.de' # name of time server, may be empty TIME_ACCESS_AT_BOOT_TIME='no' # access time server at boot time: yes or no TIME_CIRCUITS='1 2 3' # circuit indices when to activate time sync #------------------------------------------------------------------------------ # Optional package: DHCP #------------------------------------------------------------------------------ OPT_DHCP='no' # install DHCP server: yes or no DHCP_LS_TIME_DYN='3600' # default time for dynamic leases: 1 hour DHCP_MAX_LS_TIME_DYN='7200' # max time for dynamic leases: 2 hours DHCP_LS_TIME_FIX='86400' # default time for fix leases: 1 day DHCP_MAX_LS_TIME_FIX='604800' # max time for fix leases: 1 week DHCP_RANGE_1='192.168.6.2 192.168.6.100' # range of n'th ethnet, see ETH_N ! #------------------------------------------------------------------------------ # Optional: mount additional devices #------------------------------------------------------------------------------ OPT_MOUNT='no' # mount disks or cdroms: yes or no MOUNT_N='1' # number of mounts MOUNT_1_DEV='/dev/hda2' # example: 1st partition of first hard disk MOUNT_1_POINT='/hd' # mount point, here: /hd MOUNT_1_FS='ext2' # filesystem type: fat, vfat, or ext2 MOUNT_1_OPTION='rw' # additional options, see documentation! #------------------------------------------------------------------------------ # Optional package: CDROM (only for ide, scsi see below) #------------------------------------------------------------------------------ OPT_CDROM='no' # install IDE CDROM drivers: yes or no #------------------------------------------------------------------------------ # Optional package: SCSI drivers #------------------------------------------------------------------------------ OPT_SCSI='no' # install SCSI drivers: yes or no SCSI_DRV_N='1' # number of SCSI drivers, '2' means: with cdrom SCSI_DRV_1='aha1542' # Adaptec AHA154x Controller #SCSI_DRV_1='sym53c8xx' # All Adapter with Symbios Logic (LSI) Chips 53c8xx #SCSI_DRV_1='wd7000' # Western Digital 7000 SCSI host adapter #SCSI_DRV_1='ultrastor' # UltraStor 14F, 24F and 34F SCSI-2 host adapter #SCSI_DRV_1='u14-34f' # UltraStor 14F and 34F SCSI-2 host adapters #SCSI_DRV_1='tmscsim' # tmscsim #SCSI_DRV_1='t128' # Trantor T128/T128F/T228 SCSI host adapters #SCSI_DRV_1='sym53c416' # sym53c416 SCSI host adapter #SCSI_DRV_1='sim710' # sim710 #SCSI_DRV_1='seagate' # 8-bit SCSI controllers #SCSI_DRV_1='qlogicisp' # all QLogic PCI SCSI host adapters #SCSI_DRV_1='qlogicfc' # QLogic ISP2100 SCSI-FCP host adapter #SCSI_DRV_1='qlogicfas' # adapters based on the FASXX chip #SCSI_DRV_1='psi240i' # PSI240i EIDE interface card #SCSI_DRV_1='pci2220i' # PCI2220i EIDE interface card #SCSI_DRV_1='pci2000' # PCI2000I EIDE interface card #SCSI_DRV_1='pas16' # pas16 chip based cards #SCSI_DRV_1='ncr53c8xx' # NCR53C8XX family of PCI-SCSI controllers #SCSI_DRV_1='ncr53c406a' # NCR53c406a SCSI host adapter #SCSI_DRV_1='megaraid' # AMI MegaRAID 418, 428, 438, 466, 762, 490 and 467 SCSI host adapters #SCSI_DRV_1='ips' # IBM ServeRAID hardware RAID controllers #SCSI_DRV_1='initio' # Initio 91XXU(W) SCSI host adapter #SCSI_DRV_1='in2000' # ISA bus SCSI host adapter #SCSI_DRV_1='gdth' # gdth family #SCSI_DRV_1='g_ncr5380' # generic NCR family of SCSI controllers #SCSI_DRV_1='fdomain' # Future Domain's 16-bit SCSI host adapters, incl. AHA2920A #SCSI_DRV_1='eata' # support for the EATA-DMA protocol compliant SCSI Host Adapters #SCSI_DRV_1='dtc' # DTC 3180/3280 SCSI Host Adapters #SCSI_DRV_1='buslogic' # BusLogic MultiMaster and FlashPoint SCSI Host Adapters #SCSI_DRV_1='atp870u' # adapters with atp870u #SCSI_DRV_1='am53c974' # AM53/79C974 SCSI host adapters #SCSI_DRV_1='aic7xxx' # various aic7xxx based Adaptec SCSI controllers *not* AHA2920 #SCSI_DRV_1='aha1740' # driver for AHA-1740 #SCSI_DRV_1='aha152x' # driver for AHA-1510, AHA-1520, AHA-1522, and AHA-2825 #SCSI_DRV_1='advansys' # all adapters manufactered by advansys #SCSI_DRV_1='a100u2w' # Initio INI-A100U2W SCSI host adapter #SCSI_DRV_1='53c78xx' # 53c7 and 8xx NCR family of SCSI controllers SCSI_DRV_1_OPTION='' # enter driver option here, optional! SCSI_DRV_2='cdrom' # SCSI CDROM driver SCSI_DRV_2_OPTION='' # enter cdrom driver option here, not used yet #------------------------------------------------------------------------------ # Optional package: PCMCIA support: #------------------------------------------------------------------------------ OPT_PCMCIA='no' # pcmcia cards used: yes or no PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or 'tcic' PCMCIA_PCIC_OPTS='' # option for socket driver, usually empty PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually empty PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager, usually empty #------------------------------------------------------------------------------ # Optional package: PROXY (junkbuster) #------------------------------------------------------------------------------ OPT_PROXY='no' # proxy junkbuster: yes or no PROXY_ACCESS='192.168.6.0/24' # proxy: permit access from lans x.x.x.x/nn ... PROXY_PORT='8000' # proxy: listen port, s. FIREWALL_DENY_PORT_x ! PROXY_FORWARD='' # proxy: optional forward-host:forward-port #------------------------------------------------------------------------------ # Optional package: VBOX #------------------------------------------------------------------------------ OPT_VBOX='no' # install answering machine: yes or no VBOX_COMPRESSION='adpcm-4' # voice compr. level: adpcm-2/3/4 = 2/3/4 kb/s VBOX_FREESPACE='0' # if space < freespace a call isn't accepted VBOX_DEBUGLEVEL='FEWIDJ' # FEWIDJ means "log everything", -> see docs VBOX_VBOXD_ALLOW_1='*' # optional: vboxd requests are allowed from... VBOX_VBOXD_ALLOW_2='' # "*" means every host VBOX_VBOXD_ALLOW_3='' VBOX_VBOXD_ALLOW_4='' VBOX_USERS_N='1' # number of users VBOX_COMMON_SPACE='yes' # common spoolspace for all users?: yes or no VBOX_BEEP_USERS='vboxuser' # users to be "beeped": blank separated list VBOX_BEEP_HOURS='*' # when to use the beep signal: timerange VBOX_BEEP_PAUSE='10' # pause between beeps in seconds # user specific configuration: VBOX_USERNAME_1='vboxuser' # username VBOX_PASSWD_1='vbox' # password VBOX_MSN_1='555111' # ph. number to be monitored (without area code) VBOX_SPACE_1='6000' # diskspace to be used for spooldir(s) in kb # the following configuration simulates an old-fashioned analog answering # mashine: every call is answered at any time, always after 4 rings, # the standard message is played and a 60 second message will be recorded. # (boring... ;-) # Please read the documentation to create a more complex setup VBOX_CALLERID_1_1 = '* - --- Unknown ---' VBOX_CALLERID_1_2 = '' VBOX_CALLERID_1_3 = '' VBOX_CALLERID_1_4 = '' VBOX_RINGS_1_1 = '* * 4' VBOX_RINGS_1_2 = '' VBOX_RINGS_1_3 = '' VBOX_RINGS_1_4 = '' VBOX_SSECTION_1_1 = '* * standard.msg 60' VBOX_SSECTION_1_2 = '' VBOX_SSECTION_1_3 = '' VBOX_SSECTION_1_4 = '' VBOX_SECNAME_1_1 = '' VBOX_SECTION_1_1_1 = '' VBOX_SECTION_1_1_2 = '' VBOX_SECNAME_1_2 = '' VBOX_SECTION_1_2_1 = '' VBOX_SECTION_1_2_2 = '' #------------------------------------------------------------------------------ # end of orginal config.txt #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # Optional package: HDPARM (jth) #------------------------------------------------------------------------------ OPT_HDPARM='no' # hdparm: yes or no HDPARM_N='1' # number of hdparms HDPARM_1_DEV='/dev/hda' # example: first hard disk HDPARM_1_OPTION='-S 36' # options, see documentation! #------------------------------------------------------------------------------ # Optional package: setiathome #------------------------------------------------------------------------------ OPT_SETI='yes' # if yes, setiathome client is included SETI_START='yes' # if yes, setiathome starts at bootup SETI_BOOTTIME='180' # delay in seconds until seti starts at bootup SETI_BACKUP='yes' # if yes, a backup of workunit will be created # or an existing backup will be restored SETI_BACKUPTIME='18000' # seconds for backupinterval SETI_BACKUPDIR='/mnt' # directory where to backup the workunit SETI_NICELEVEL='1' # Set "nice" priority #------------------------------------------------------------------------------ # Optional package: MGETTY (receive faxes, dialin via analog modem) #------------------------------------------------------------------------------ OPT_MGETTY='yes' # install mgetty: yes or no MGETTY_DEV='com2' # COM port - com1 or com2 MGETTY_MSN='+49036xxxxxx' # your msn for fax MGETTY_RAM='0' # use 4 MB RAMDisk for received faxes MGETTY_FAXDIR='/mnt/faxe' # directory for received faxes MGETTY_DNS='192.168.0.88' # DNS für Einwahlrechner wird per MS-DNS übergeben (FLi4L) MGETTY_SPEED='38400' # COM port speed for pppd MGETTY_IPADDR='192.168.0.88' # IP address of fli4l router MGETTY_PEER='192.168.1.1' # IP address of peer MGETTY_NETWORK='192.168.1.0' # remote network MGETTY_USER='xxxx' # login name for pppd MGETTY_PASS='xxxxxxxx' # password for pppd #------------------------------------------------------------------------------ # Optional Package: Restart Counter; Logs Start and End time of the router #------------------------------------------------------------------------------ OPT_RESTART='yes' # Install restart counter 'Yes' or 'No' RESTART_PATH='/mnt/restart.log' # Path to the logfiles, Remember: Don't save in the RAM !!! RESTART_CIRCLE='600' # Timecircle within the logfile is updated (in seconds) # 300sec=5min / 600sec=10min / 1800sec=30min #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # Optional package: LPTKEYS #------------------------------------------------------------------------------ OPT_LPTKEYS='no' # install LPTKEYS LPTKEYS_PORT='0x278' # IO Address of LPT port LPTKEYS_N='5' # number of keys LPTKEYS_BEEP='yes' # key-beep 'yes' or 'no' LPTKEYS_CMD_1='exit' # function of key1 (stop lptkeys) LPTKEYS_CMD_2='reboot' # -"- of key2 (reboot fli4l) LPTKEYS_CMD_3='halt' # -"- of key3 (Stop fli4l) LPTKEYS_CMD_4='imonc hangup >/dev/nul' # -"- of key4 (hangup) LPTKEYS_CMD_5='imonc dial >/dev/nul' # -"- of key5 (dial default circuit) #------------------------------------------------------------------------------ # end of config.txt #------------------------------------------------------------------------------